您好,歡迎訪問無錫合達電子設備有限公司官網!
0510-83212339
138-6181-2138
無錫合達電子設備有限公司
您的位置:首頁 > 新聞動態 > 行業知識
聯系我們

無錫合達電子設備有限公司

地址:無錫市惠山區恒新路3號
電話:138-6181-2138

咨詢熱線138-6181-2138

高風溫是現代老化房的重要技術特征

發布時間:2018-12-12人氣:119

高風溫是現代老化房的重要技術特征。提高風溫是增加噴煤量、降低焦比、降低生產成本的主要技術措施。近幾年,國內鋼鐵企業高爐的熱風溫度逐年升高,2007年重點企業熱風溫度比上年提高25℃。特別是新建設的一批大高爐(大于2000立方米)熱風溫度均超過1200℃,達到國際先進水平。如2002年后,首鋼技術改造或新建高爐的熱風溫度均實現高于1200℃的目標。

High wind temperature is an important technical feature of modern aging houses. Increasing air temperature is the main technical measure to increase coal injection, reduce coke ratio and reduce production cost. In recent years, the hot blast temperature of blast furnaces in domestic iron and steel enterprises has been increasing year by year. In 2007, the hot blast temperature of key enterprises increased by 25 C compared with the previous year. Especially, the hot air temperature of newly constructed large blast furnaces (more than 2000 cubic meters) is over 1200 C, reaching the international advanced level. For example, after 2002, the hot blast temperature of Shougang's technical renovation or new blast furnace has reached the target of higher than 1200 C.

老化房是為高爐加熱鼓風的設備,是現代高爐不可缺少的重要組成部分。提高風溫可以通過提高煤氣熱值、優化老化房及送風管道結構、預熱煤氣和助燃空氣、改善老化房操作等技術措施來實現。理論研究和生產實踐表明,采用優化的老化房結構、提高老化房熱效率、延長老化房壽命是提高風溫的有效途徑。

Aging room is a heating and blast equipment for blast furnace, and it is an indispensable and important part of modern blast furnace. The improvement of air temperature can be achieved by increasing the calorific value of gas, optimizing the structure of aging room and air supply pipeline, preheating gas and combustion-supporting air, and improving the operation of aging room. Theoretical research and production practice show that optimizing the structure of aging room, improving the thermal efficiency of aging room and prolonging the life of aging room are effective ways to improve wind temperature. 

辛苦整理!轉載請注明來自 http://www.661701.live/show.asp?id=104

推薦資訊

138-6181-2138
6场半全场第13091期